W
William MillerAug 19, 2025
What to do if my Bosch Washer shows E:30 / -10 error?
- JJose LopezAug 20, 2025
If the Bosch Washer displays error code E:30 / -10, it could be due to several reasons. The water pressure might be low, or the filters in the water inlet could be clogged, so you should clean them. Also, ensure that the water tap is open and the water inlet hose is not kinked or pinched. If the error persists, wait 5 minutes, switch the device off and on. If the error message appears again, call for service.