Bosch WNA14400IN - Placing Laundry into the Drum

en Operating the appliance
36
If an individual drying programme or
washing and drying without interruption
is selected, you can change the default
settings for the drying programme by
touching Dry as required. Overview of
programmes
Touch the Dry button to set the desired
drying mode or drying time (only for an
individual drying programme Gentle
Dry ‰andIntensive Dry 5).
~ Page 33
Notes
■ Options can be selected, deselected
or changed depending on the
progress of the programme.
■ After changing the default settings
for the programme, the programme
duration may change.
Selecting additional programme
settings
Select the additional programme
settings by touching buttons in the
display
e.g. Speed,Eco, Extra Rinse.
Notes
■ The selectable additional functions
depends on the selected washing/
drying programme.
■ Options can be selected, deselected
or changed depending on the
progress of the programme.
■ After changing the additional
programme settings for the selected
programme, the programme
duration may change.
Placing laundry into the drum
Insert the laundry.
Close the door.
Notes
■ Unfold and load presorted items
of laundry. Mix large and small
items. Washing items of different
size distribute themselves better
during the spin cycle. Individual
items of washing may cause
an unbalanced load.
■ Observe the maximum specified
load. Overfilling adversely affects the
washing/drying result and promotes
creasing. Make sure that no items of
laundry are trapped between the
door and the rubber seal, and close
the door.