Why does my Bosch WNA144V9GB Washer/Dryer show error code E:30 / -10 or H:95?
If the Bosch Washer/Dryer displays error code E:30 / -10 or H:95 and End, it could be due to several reasons. First, ensure that the tap is turned on. Second, check the water inlet hose to make sure it is not kinked or jammed. The solution is to check the installation of the water inlet hose.
What to do if my Bosch Washer/Dryer shows error E:30 / -10 or H:95 and End?
If the Bosch Washer/Dryer displays error code E:30 / -10 or H:95 and End, it could be due to blocked filters in the water inflow. Clean the filters to resolve this. Also, check whether the tap has sufficient water pressure. If the issue persists, it may be due to a defective water level measuring system. In this case, wait approximately 5 minutes until the draining process ends, then restart the appliance. If needed, start the draining process again. If the fault continues, contact customer service.
Why is water leaking from the outlet hose of my Bosch WNA144V9GB Washer/Dryer?
If water is leaking from the water outlet hose of your Bosch Washer/Dryer, it may be that the water outlet hose is not connected correctly or is damaged. Check the installation of the water outlet hose and replace it if damaged.
Why is my laundry still wet after spin cycle in my Bosch WNA144V9GB?
If the laundry is too wet after the spin cycle in your Bosch Washer/Dryer, it could be because a low spin speed was selected. Start the Spin programme. For future wash cycles, set a higher spin speed. The appliance may also be using a reduced spin speed to eliminate an imbalance. Redistribute the laundry in the drum and start the Spin programme. Always select the highest possible spin speed for the washing programme.
How to prevent creasing in my Bosch WNA144V9GB?
Creasing in your laundry from the Bosch Washer/Dryer can occur if the selected programme is unsuitable for the type of fabric. Set a suitable programme for subsequent drying.
How to get rid of odors in my Bosch WNA144V9GB Washer/Dryer?
If odours have formed in your Bosch Washer/Dryer, when you are not using the appliance, leave the door and detergent drawer open so that residual water can evaporate.
What to do if my Bosch Washer/Dryer shows error E:36 / -10?
If your Bosch Washer/Dryer displays error code "E:36 / -10" or if the detergent solution is not being pumped out, check the installation of the water outlet hose. Also, clean the drain pipe and the water outlet hose. Ensure that the pump cover is correctly installed.
What to do if Bosch WNA144V9GB shows H:32 error?
If your Bosch Washer/Dryer displays "H:32" and interrupts the spin cycle, it is because the laundry is unevenly distributed. Redistribute the laundry in the drum.
Why does the display go out on my Bosch WNA144V9GB Washer/Dryer?
If the display on your Bosch Washer/Dryer goes out and the Start/Reload button flashes, the energy-saving mode is active. Press Start/Reload to exit this mode.
What does E:30/-20 error mean on my Bosch WNA144V9GB Washer/Dryer?
If the Bosch Washer/Dryer displays "E:30/-20" indicating a critical malfunction, turn off the water tap. Wait approximately 5 minutes until the draining process ends, then restart the appliance. If required, start the draining process again. If the fault persists, contact customer service.
General| Appliance type | Washer/Dryer |
|---|---|
| Load capacity washing | 9 kg |
| Load capacity drying | 6 kg |
| Maximum spin speed | 1400 RPM |
| Energy efficiency class washing | A |
| Energy efficiency class washing & drying | B |
| Washing performance class | A |
| Spinning performance class | B |
| Noise level washing | 54 dB |
| Noise level spinning | 74 dB |
| Number of programmes | 15 |
| Quick wash time | 15 min |
| Inverter motor | Yes |
| Drying Technology | Condenser |
| Display | LED |
| Colour | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Drum Material | Stainless Steel |
| Dimensions (H x W x D) | 84.8 x 59.8 x 59.0 cm |
Read manual, keep safe, proper usage, and user restrictions for the appliance.
Precautions against electric shock and fire hazards during appliance installation.
Guidelines for safe operation, handling, and preventing injury or suffocation.
Covers risks from children locking in, small parts, dust, and chemicals.
Warnings about flammable items, interrupted drying, and physical injury.
Guidelines for safe cleaning, maintenance, and repairs to prevent shock or injury.
Ensuring correct water inlet connection and pressure for appliance longevity.
Recommendations for reducing energy and water consumption during washing.
Steps for unpacking, inspecting for damage, and checking package contents.
Detailed instructions for removing transit bolts and securing them for future use.
Procedure for connecting the water inlet hose to the tap and checking for leaks.
Steps to align appliance feet for stability and quiet operation.
Instructions for plugging in the appliance and ensuring proper electrical connection.
Identification of main components of the washer dryer.
Explanation of the control panel layout, buttons, and display indicators.
Procedure for running an initial wash cycle without laundry to clean the drum.
Explanation of various symbols, codes, and information shown on the appliance display.
Detailed description of each button's function and available selections.
How to adjust the laundry dryness level for different drying results.
Overview of available wash and dry programmes with load capacities.
List of optional accessories, their use, and corresponding order numbers.
Instructions for preparing laundry, emptying pockets, and securing items.
Guidelines for using detergents and care products safely and effectively.
Steps for turning on the appliance and selecting a wash programme.
Instructions for inserting and using the measuring aid for liquid detergent.
Steps to start, pause, and monitor the washing programme.
Procedure for adding or removing laundry after the programme has started.
How to activate and deactivate the childproof lock for safety.
Steps to cancel the drying programme and cool down the laundry.
Details and descriptions of configurable basic settings for the appliance.
Instructions for cleaning the appliance's drum to maintain performance.
Procedure for emptying the drain pump before cleaning or maintenance.
Solutions for laundry creasing and noise during the spin cycle.
Resolving display errors like E:36/-10 and drain pipe blockages.
Resolving issues like appliance not working, door not closing or opening.
Troubleshooting why the programme won't start or the door cannot be opened.
Resolving water not draining, detergent not dispensing, and blocked filters.
Addressing appliance vibrations, drum not rotating, and foam build-up.
Resolving spin programmes not starting and loud noises during spinning.
Solutions for damp laundry, detergent residue on dry/damp items.
Addressing damp laundry due to various factors and fan noise during washing.
Troubleshooting programme duration changes, drum jerks, and detergent drips.
Steps to release the appliance door using the emergency release mechanism.
Instructions for removing the appliance and inserting transit bolts for transport.
Guidelines for environmentally friendly disposal of the old appliance.
Locating E-Nr. and FD numbers for contacting customer service.
Table showing energy and water consumption for different programmes.
Details on appliance dimensions, weight, power, and water pressure.
To Next Page
