A cold water inlet valve similar to washers is used.
A 90º elbow connects the hose to the nozzle (through a hex adapter).
It can be accessed by removing the front panel.
Dryers come with a “Y” adapter, allowing the cold water line to be split
and connected to both washer and dryer.
4.1.16 AQUASTOP
®
(aqua secure) inlet hoses
Hot and cold water AQUASTOP
®
inlet hoses eliminate leaking. The
AQUASTOP
®
hose consists of an inner hose (~ inlet water tubing)
and an outer hose (corrugated, ~ to drain hoses). If the inner hose
leaks, a small indicator window will show red, meaning the hose must
be replaced (hoses cannot be reused once a leak occurs).
AQUASTOP
®
hoses can be used with any washer (or misting dryer)
with standard US threads (3/4” NH, 11.5 threads/inch). They protect
homes and provide peace of mind for people on vacation and those
asleep, busy or who don’t shut off water valves when washers (and
misting dryers) aren’t in use.
Cold
water
inlet
valve
Indicator
window
702_58300000143767_ara_en_a Page 11 of 33
To Next Page
Loading...
Need help?
General