Bose 302 TANDEM-TUNEDT BASS SYSTEM

802@-1I, 802W-II, 802C SYSTEM CONTROLLER,
302
TM
TANDEM-TUNEDTM BASS SYSTEM
802-11
802W-1I
802C SYSTEM CONTROLLER*
302TANDEM-TUNE~MBASSSYSTEM
*Note: All information concerning the 802-C Controller in this manual pertains to units with serial grouping in the 100000 range. For further
information on the newer SMD versions (Serial number 2000000 range) refer to the 802-C Controller Supplement: Bose PIN 129292.
©1994 BOSE CORPORATION
SERVICE MANUAL

Bose 302 TANDEM-TUNEDT BASS SYSTEM Specifications

General

Brand	Bose
Model	302 TANDEM-TUNEDT BASS SYSTEM
Category	Speakers
Language	English

Summary

SERVICE MANUAL

SPECIFICATIONS

802 Series II and 802 W Series II Loudspeakers

Detailed specifications for the 802-11 and 802W-11 loudspeaker systems.

302 Tandem-Tuned Bass System

Technical specifications for the 302 Tandem-Tuned Bass System.

802-C System Controller

Specifications for the 802-C System Controller, including inputs, outputs, and power.

802-11 and 802 W-II Loudspeaker Test Procedure

802-11 and 802 W-II Troubleshooting Guide

802 W-II Test and Replacement Procedures

Individual Driver Test and Replacement

Procedures for testing and replacing individual drivers in 802W-II speakers.

302 Driver and Component Replacement

Driver Replacement Procedure

Steps for replacing a woofer driver in the 302 speaker.

302 Troubleshooting Guide

802 C System Controller Test Procedure

Initial Test and Mode Indicator Status

Frequency Response Tests

Distortion and Noise Measurements

802 C Disassembly and Reassembly

Cover and Top PCB Removal

Steps for removing the cover and top PCB from the 802C controller.

Lower PCB Removal

Steps for removing the lower PCB from the 802C controller.

Lower PCB Installation

Steps for reinstalling the lower PCB into the 802C controller.

Top PCB Installation and Cover

Steps for reinstalling the top PCB and cover onto the 802C controller.