Bose 402 Series II

Safety and Regulatory
Compliance
All versions of the Bose 402 Series II
loudspeakers comply with ANSI/EIA
636, Recommended Loudspeaker
Safety Practices and EMC Directive
89/336/EEC and Article 10 (1) of the
Directive in compliance with
EN50081-1, EN50082-1, as signified
by the CE mark.
All versions of the Bose 402 Series II
loudspeaker are covered by a 5-year,
transferable limited warranty.
Warranty Information
The loudspeaker system shall be
used
with a PANARAY
®
system
digital controller, to be
connected
before the input(s) of the system
power amplifier(s), or with a 402
®
loudspeaker EQ card, to be installed
in a Bose
®
1600 or 1800 amplifier.
The electronic controller shall be the
Bose PANARAY system digital
controller
Bottom View
Top View
Side View
Rear View
402
®
Series II Speaker Views