11
English FrançaisEspañol
Listening to an External Audio Source
Connecting an external audio source
The Acoustic Wave
®
II CD changer provides two rear-panel inputs (AUX 1 and AUX 2) for !
connecting external audio devices such as a TV, VCR, DVD player, cassette player, or MP3
player. This gives you the advantage of hearing Acoustic Wave
®
music system II sound from a
range of sources.
To make the connection, use an appropriate stereo cable (not included).
1. Connect one end of the cable to the audio output jacks of the device and the other end to
one set of AUX input jacks on the changer (Figure 8). Be sure to match the red and white
plugs on the cable to the red (R) and white (L) AUX jacks on the changer.
2. Repeat Step 1 to connect another device.
3. Plug the device into an AC outlet.
Figure 8
External audio device
connections
Audio device
AUX 1 INPUT
AUX 2 INPUT
To Next Page
Loading...
