What does 'NO DISC' mean on my Bose Acoustic Wave music system Media Converter?
If “NO DISC” appears on the display of your Bose Media Converter, open the CD compartment and ensure a CD is inserted with the label facing up.
Why is my Bose Acoustic Wave music system Media Converter remote control inconsistent?
If the remote control for your Bose Media Converter is not working correctly, try the following: * Move closer to the unit when using the remote. * Ensure you are aiming the remote directly at the system. * Check for any interference from room lighting, sunlight, or obstructions on the lens. * Test the unit in a different location to rule out interference. * Verify the remote control battery is correctly installed. * If the issue persists, replace the remote control battery.
What to do if CD does not play on Bose Acoustic Wave music system?
If your Bose Media Converter CD player isn't working, consider the following: * Confirm that the CD source is selected. * Make sure the CD is loaded with the label facing up. * Check the CD for dirt or damage. Clean if necessary. * Ensure you're using an audio CD, not a DVD. * Try playing a different CD to see if the issue is with the disc.
Why is the display window blank on my Bose Acoustic Wave music system Media Converter?
If the display window on your Bose Media Converter is blank, ensure the system is plugged into a working AC or DC power source and is turned on.
What does 'NOT PLAYABLE' mean on my Bose Acoustic Wave music system display?
If “NOT PLAYABLE” appears (blinking) on the display of your Bose Media Converter, it indicates that the CD format is not supported.
What to do if my Bose Acoustic Wave music system Media Converter CD does not play?
If your Bose Media Converter CD does not play, ensure that a CD is in the compartment with the label side up and that the CD compartment is closed.
Why my Bose Acoustic Wave music system has no system operation?
If your Bose Media Converter is not operating, ensure the power cord is completely plugged into both the system and the wall outlet.
Why does the backlight not stay on on my Bose Acoustic Wave music system?
If the display backlight on your Bose Media Converter does not stay on, and the system is running on DC power, this is normal. The backlight will only turn on briefly when a control panel button is pressed.
What causes weak AM reception on a Bose Acoustic Wave music system Media Converter?
To improve weak AM reception on your Bose Media Converter: * Adjust the internal antenna by slightly rotating the unit. * Move the unit away from potential sources of electrical noise such as TVs, refrigerators, fluorescent lamps, halogen lamps, and dimmer switches. * If the issue persists, you may be in an area with weak AM signal coverage.
How to fix a Bose Acoustic Wave music system that does not function?
If your Bose Media Converter system isn't functioning, ensure the power cord is securely plugged into both the system and a working electrical outlet.
General| Sound output mode | Stereo |
|---|---|
| Built-in display | Yes |
| Clock | Yes |
| Headphones jack | Yes |
| Media type | CD |
| Speaker system | 2 speakers |
Covers warnings about fire, shock, and product exposure to liquids.
Details precautions to avoid electric shock and hazardous radiation.
Covers safe placement, ventilation, heat sources, plugs, and cords.
Guidelines for using proper power sources and grounding antennas.
Instructions for safely unpacking the system and verifying all parts are present.
Steps for connecting the system to an AC power outlet.
Overview of the system's design, technology, and unique listening modes.
Explanation of buttons and functions on the remote control.
Details on using the system's on-unit control panel buttons.
Instructions for turning the system on/off and adjusting audio volume.
Step-by-step guide to loading and playing conventional audio CDs.
Solutions for problems like no sound, poor reception, and non-working remote.
To Next Page