Bose Acoustimass 6 Series III User Manual (English)

Questions and Answers:

D
Devon JohnsonJul 26, 2025
Why is there no sound from my Bose Home Cinema speakers?
- C
  Crystal PatelJul 26, 2025
  If your Bose Home Cinema speakers produce no sound, first, check all speaker connections and ensure the powered Acoustimass module is properly plugged in. When using digital sound, verify that a coaxial or optical cable links the digital output of your DVD player to the digital input on your receiver. Confirm the correct audio source is selected on both your receiver and player (e.g., DVD audio for DVD sound), and disconnect any headphones. Finally, increase the volume to a suitable level.
B
bentleytrevorAug 1, 2025
What to do if there is not enough or too much bass on Bose Home Cinema speakers?
- T
  Tommy ArmstrongAug 1, 2025
  To address the issue of not enough or too much bass from your Bose Home Cinema speakers, try repositioning the powered Acoustimass module. Moving it closer to a wall or corner will typically increase bass, while moving it farther away will decrease it. Additionally, you can fine-tune the bass level by adjusting the LFE Level or Room Compensation control.
J
Joshua MyersAug 7, 2025
How to fix a Bose Home Cinema system that won't turn on?
- J
  Jason WheelerAug 7, 2025
  If your Bose Home Cinema system isn't functioning, ensure both the receiver and the powered Acoustimass module are connected to a working AC outlet and that the receiver is powered on. Also, ensure that you've selected a source on the receiver, such as video, CD, DVD, or tuner.
J
james48Aug 13, 2025
What to do if Bose Home Cinema speakers sound distorted?
- B
  Barbara PooleAug 14, 2025
  If the sound from your Bose Home Cinema speakers is distorted, inspect the speaker wire for any damage. Additionally, try reducing the volume of any external components connected to the receiver.
J
johnsonjodiAug 19, 2025
How to restore sound from cube speakers on Bose Home Cinema?
- G
  Gregory MartinAug 19, 2025
  To restore sound from the cube speakers of your Bose Home Cinema system, ensure that the powered Acoustimass module is plugged in and that the receiver is turned on.

Bose Acoustimass 6 Series III Specifications

General

System Configuration	5.1
Subwoofer	Yes
Speaker Type	Home Cinema Speaker System
Impedance	4-8 ohms
Compatibility	Compatible with A/V receivers and amplifiers rated from 10 to 150 watts per channel, rated from 4 to 8 ohms
Satellite Speakers	5 Direct/Reflecting speakers