Bose AMM108 Product Guide

6 • English Bose AMM108 • Product Guide
PRO.BOSE.COM
Installation / Technical Information
Bottom View
Suspension
WARNING: To ensure safe product installation and usage, it is the installer's responsibility to refer to the previous
Installation Guidelines section and the user documentation of all mounting components before installing the
product.
To suspend the loudspeaker from the ceiling, attach M10 threaded eye bolts to the two M10 threaded attachment points
on the bottom panel of the loudspeaker. Use only load-rated eye bolts intended for lifting (per ASME B30.26).
For easier adjustment of the angle, use the AMM Suspension Bracket (843344-0010). To access
documentation for the AMM Suspension Bracket, scan the QR code or visit pro.Bose.com/ammsbracket.
If you are using a custom-designed mounting or suspension system or hardware, a licensed professional
engineer must review the design and fabrication. Obtain all mounting or suspension system components
from reputable manufacturers.
Technical Specifications
Coverage 110°horizontal × 60°vertical
Tilt-back Angle 35°
IP Rating IP43 (front-of-house position only)
Connectors 2 × Neutrik® NL4 inputs Passive:
Pin 1+: FR+
Pin 1−: FR−
Pin 2+: Not connected
Pin 2−: Not connected
Power Handling Passive: 150W (RMS), 2400W (peak)
Nominal Impedance Passive: 8Ω
Dimensions (height× width× depth) 31.8cm× 31.8cm× 26.8cm (12.5in× 12.5in× 10.5in)
Net Weight 13.04kg (28.75lb)
Processor Presets
Use only approved Bose Professional loudspeaker
presets. The presets listed here are available when
using Bose Professional PowerMatch amplifiers.
For a complete list of products that support
Bose Professional AMM loudspeaker presets visit
PRO.BOSE.COM.
M10 ×2
q w
q
w
Application Preset Name
Main Loudspeaker AMM108(FR)
Main Loudspeaker + Subwoofer AMM108(FR) + AMS115-sub
Stage Monitor AMM108(MON)

Bose AMM108 Specifications

General

Brand	Bose
Model	AMM108
Category	Speakers
Language	English