21
|
ENG
ADAPTIQ AUDIO CALIBRATION
3. On the remote, press the SoundTouch button e.
4. Press and hold f until the TV light g and the Bluetooth light l on the soundbar
glow green.
ADAPTiQ audio calibration begins.
NOTE: If you don’t hear your language, press d and c on the navigation pad to
cycle through languages. To reset the language, press and hold f for
10 seconds.
5. Follow the voice prompts until the ADAPTiQ process is complete.
If you hear an error message and are unable to complete ADAPTiQ audio
calibration, see page 29.
6. Unplug the ADAPTiQ headset from the soundbar and store it in a safe place.
TIP: If you later connect the optional Bose Surround Speakers or
Virtually Invisible 300 surround speakers, move the bass module or move
any furniture, run ADAPTiQ audio calibration again to ensure optimal sound
quality.
To Next Page
Loading...
