Bose Bass Module 700

Other manuals for Bose Bass Module 700

Quick Start Guide28 pages

Manual28 pages

User Guide8 pages

Questions and Answers:

A
Ana HolmesAug 3, 2025
What to do if I have intermittent or no audio from my Bose Bass Module 700?
- A
  aholmesAug 3, 2025
  If you're experiencing intermittent or no audio from your Bose Control Unit, try the following: * Ensure the system is unmuted and the volume is at an audible level. * Check if the soundbar is playing audio; if not, consult its guide. * Confirm the system status light is solid white, indicating a connection between the bass module and soundbar. * Test different audio sources and ensure you're playing content with bass frequencies. * Repeat the connection process. * Refer to the placement guidelines for optimal positioning of the bass module.
B
brivasAug 10, 2025
Why does my Bose Bass Module 700 have poor or distorted sound from bass module?
- P
  Paul MendezAug 10, 2025
  If you're getting poor or distorted sound from the bass module of your Bose Control Unit, try these steps: 1. Remove any protective films from the bass module. 2. Run ADAPTiQ audio calibration. 3. Adjust the bass level. 4. Ensure the bass module is placed according to the placement guidelines.
J
Jenna NelsonAug 18, 2025
What to do if bass module doesn’t connect to the Bose soundbar?
- B
  Bill MitchellAug 18, 2025
  If your bass module isn’t connecting to the soundbar of your Bose Control Unit, try these steps: 1. Unplug both the bass module and soundbar power cords, wait 30 seconds, and then firmly plug them back into a working AC outlet. 2. Connect the bass module to the soundbar using a 3.5 mm audio cable.
S
Sherry LopezAug 27, 2025
Why I am unable to complete ADAPTIQ audio calibration with my Bose SoundTouch 300 soundbar?
- C
  Christine AnthonyAug 27, 2025
  If you are unable to complete ADAPTiQ audio calibration with your Bose SoundTouch 300 soundbar, it may be due to the microphone on the ADAPTiQ headset not detecting sound. Try the following: * Secure all cables and ensure the ADAPTiQ headset cable is firmly connected to the soundbar. * Make sure the microphone opening on the headset is not blocked. * Re-run ADAPTiQ audio calibration in a quiet room. * Move the headset farther from the speakers or to a different listening location. * Hold your head still during calibration. If the problem persists, your ADAPTiQ headset may be damaged.

Bose Bass Module 700 Specifications

General

Subwoofer type	-
Wireless subwoofer	Yes
Number of subwoofers	1
Subwoofer frequency range	- Hz
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Product color	Black
Certification	CE

Summary

Important Safety Instructions

Key safety instructions for operating the apparatus safely and correctly.

Warnings and Cautions

Critical warnings and cautions to prevent damage or injury during use.

Regulatory Information

Management Regulation for Low-power Radio-frequency Devices

Details on regulations for low-power radio-frequency devices.

China Restriction of Hazardous Substances Table

Table detailing hazardous substance restrictions for China compliance.

Taiwan Restriction of Hazardous Substances Table

Table detailing hazardous substance restrictions for Taiwan compliance.

Please Complete and Retain for Your Records

Instructions for users to record product serial and model numbers.

Legal Information

Whats in the Carton

Bass Module Placement

Recommendations

Recommendations for optimal placement of the bass module for best performance.

Placing a Second Bass Module

Guidance on positioning a second bass module for enhanced bass.

Power

Connect the Bass Module to Power

Step-by-step instructions for connecting the bass module to a power source.

Connect to a Soundbar

Choose Your Connection Method

Guidance on selecting the appropriate connection method for your soundbar.

Connect Using the Bose Music App

Instructions for connecting the bass module using the Bose Music mobile app.

New to the Bose Music App?

Steps for downloading and setting up the Bose Music app for new users.

Connect Using the SoundTouch 300 Remote

Instructions for connecting the bass module via the SoundTouch 300 remote.

Check for Sound

Procedure to verify that sound is being produced by the bass module.

Connect a Second Bass Module (Optional)

Instructions for adding an optional second bass module to the system.

Compatible Bass Modules

Details on which Bose bass modules are compatible as a second unit.

Connect to a Bose Soundbar 500, Bose Soundbar 700 or SoundTouch 300 Soundbar

How to connect the bass module to specific Bose soundbar models.

Connect to a Lifestyle 650600 Home Entertainment System

Instructions for connecting the bass module to Bose Lifestyle home systems.

ADAPTiQ Audio Calibration

Choose Your Audio Calibration Method

Guide to selecting the correct ADAPTiQ audio calibration method based on your soundbar.

Run ADAPTiQ Audio Calibration Using the Bose Music App

Steps for performing ADAPTiQ calibration using the Bose Music app.

Run ADAPTiQ Audio Calibration Using the SoundTouch 300 Remote

Instructions for performing ADAPTiQ calibration using the SoundTouch 300 remote.

Bass Setting

Choose Your Bass Adjustment Method

Guidance on selecting the method to adjust bass levels for your soundbar.

Adjust the Bass Using the Bose Music App

How to adjust bass levels using the Bose Music mobile application.

Adjust the Bass Using the SoundTouch 300 Remote

Instructions for adjusting bass levels with the SoundTouch 300 remote control.

Bass Module Status

Status Light

Explanation of the status light indicator on the bass module.

Care and Maintenance

Clean the Bass Module

Instructions on how to properly clean the exterior of the bass module.

Replacement Parts and Accessories

Information on how to obtain replacement parts and accessories.

Limited Warranty

Details regarding the limited warranty coverage for the bass module.

Troubleshooting

Try These Solutions First

Primary troubleshooting steps to resolve common issues with the bass module.

Unable to Complete ADAPTiQ Audio Calibration with Your SoundTouch 300 Soundbar

Guidance for resolving errors during ADAPTiQ calibration with SoundTouch 300.

Connect Using an Audio Cable

Instructions for connecting the bass module using a 3.5 mm audio cable.

Bass Module Connector Location

Diagrams showing the location of bass module connectors on different soundbars.

Related product manuals

Bose L1 II

70 pages

Bose ControlSpace CC-64

16 pages

Bose FreeSpace 1B

11 pages

Table of Contents

Other manuals for Bose Bass Module 700

Questions and Answers:

Bose Bass Module 700 Specifications

Summary

Important Safety Instructions

Important Safety Instructions

Warnings and Cautions

Regulatory Information

Management Regulation for Low-power Radio-frequency Devices

China Restriction of Hazardous Substances Table

Taiwan Restriction of Hazardous Substances Table

Please Complete and Retain for Your Records

Legal Information

Whats in the Carton

Bass Module Placement

Recommendations

Placing a Second Bass Module

Power

Connect the Bass Module to Power

Connect to a Soundbar

Choose Your Connection Method

Connect Using the Bose Music App

New to the Bose Music App?

Connect Using the SoundTouch 300 Remote

Check for Sound

Connect a Second Bass Module (Optional)

Compatible Bass Modules

Connect to a Bose Soundbar 500, Bose Soundbar 700 or SoundTouch 300 Soundbar

Connect to a Lifestyle 650600 Home Entertainment System

ADAPTiQ Audio Calibration

Choose Your Audio Calibration Method

Run ADAPTiQ Audio Calibration Using the Bose Music App

Run ADAPTiQ Audio Calibration Using the SoundTouch 300 Remote

Bass Setting

Choose Your Bass Adjustment Method

Adjust the Bass Using the Bose Music App

Adjust the Bass Using the SoundTouch 300 Remote

Bass Module Status

Status Light

Care and Maintenance

Clean the Bass Module

Replacement Parts and Accessories

Limited Warranty

Troubleshooting

Try These Solutions First

Other Solutions

Unable to Complete ADAPTiQ Audio Calibration with Your SoundTouch 300 Soundbar

Connect Using an Audio Cable

Bass Module Connector Location

Related product manuals