Bose BLUETOOTH HEADSET - Page 25

19
English
Tab 6, 12
Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16 Tab 5, 11
The mobile
phone and the
headset do not
connect.
• Make sure both are turned on.
• Turn the headset off, then on again. Make sure
the mobile phone is within 33 feet (10 meters)
of the headset.
• Check the Bluetooth
®
device list on your phone
to be sure Bose BT1 is selected.
– If it is selected, delete it from the list (refer to
your phone instruction manual for details).
– If it is no longer listed, repeat “Pairing your
headset and mobile phone” on page 7.
• Simultaneously hold the headset Call and
Volume – buttons down for 10 seconds to
reset the memory.
What you
hear on the
headset is not
clear.
• During a call, adjust the volume on your
mobile phone or on the headset by pressing
Volume + or – .
• Check your mobile phone signal strength.
• Make sure the mobile phone is within 33 feet
(10 meters) of the headset.
• Reposition the headset. Refer to “Fitting the
headset to your ear” on page 9.
VincentOG.book Page 19 Thursday, October 21, 2010 4:28 PM