Bose FreeSpace 360P Series - Bose FreeSpace 360 P Series II Environmental Speaker Disassembly; Driver Removal; Top Cap Removal

3
FS360P II Environmental Loudspeaker
Disassembly Procedures
Flip unit over. Lift off top cap.
Cut the wires close to the driver terminal.Remove three screws then lift up driver.
Remove three screws.
Driver Removal
Top Cap Removal
Note:
1. The crossover PCB is located in the top of the unit
and is not accessible for repair or replacement.
2. The transformer is located in the base of the unit
and is not accessible for repair or replacement.
Lift off diffuser.