35
The next section of this manual contains the electrical and mechanical parts lists. The
electrical parts list contains all electrical components located on the Main PCB,Tone
Control PCB and I/O PCB Assemblies. Each board has a specific series of reference
designators which are coded as follows:
• 0-99 series reference designators correspond to the I/O PCB Assembly
• 100-400 series reference designators correspond to the Main PCB Assembly
• 500 series reference designators correspond to the Tone Control PCB Assembly
The mechanical parts list contains hardware located on the I/O PCB and Main PCB
Assemblies.
NOTE: Fuse FS1 is located on the Main PCB. However,it is added to the PCB during
assembly of the panel. Refer to the Panel Assembly Parts List,Item 17.
Electrical and Mechanical Parts Lists
To Next Page
Loading...
Need help?
General
