Why is there no sound coming from my Bose Media Converter?
- SSusan GibsonAug 14, 2025
If you're not getting any sound from your Bose Media Converter, here are a few things to check: * Ensure the audio input cable is firmly connected to the music center SPEAKER ZONE 1 jack and the multi-pin connector is securely in the Acoustimass module AUDIO INPUT jack. * Verify the module power switch is in the ON position. * Inspect the cables connecting the Jewel CubeTM speakers to the Acoustimass module. * Make sure the CD is placed correctly, label-side up, in the magazine, and the magazine is properly inserted in the music center. * Also, make sure that the MUTE function is not enabled and the volume is at an audible level. Disconnect any headphones.