Bose FreeSpace DS 100SE Service Manual

3
SPECIFICATIONS
FreeSpace
®
DS 100SE Surface-Mount Loudspeaker
Electrical
Loudspeaker Impedance: 8 ohms
Power Handling: 100 Watts
Transformer Taps in 70V Mode: 12.5, 25, 50 and 100W
Transformer Taps in100V Mode: 25, 50 and 100W
Bypass Mode: 8 Ohms
Acoustical
Sensitivity: 85 dB SPL @1W/1m.
Maximum Sound Pressure Level: 105 dB SPL @ 1m (pink noise)
Frequency Range: 55Hz - 16kHz
Radiation Pattern: 180 degrees x 75 degrees avg from
800 Hz - 5 kHz
Compression: <3 dB with 100W watt sine wave measured in
8 ohm bypass mode
Distortion: <30% at 200W sine wave
Port Noise: < -40dB (from fundamental)
Mechanical
Dimensions: Single Speaker: 15" W x 8.5" D x 7" H (38.1 x 21.6 x 17.8 cm)
Packed System 18.5" W x 13.25" D x 10.75" H
(47 x 33.7 x 27.3 cm)
Weight: Single Speaker: 13.5 lbs (6.1 kg)
Packed System: 16 lbs (7.3 kg)

Bose FreeSpace DS 100SE Specifications

General

Certification	CE, IEC 529
Product color	White
Housing material	Acrylonitrile butadiene styrene (ABS)
Recommended usage	-
Suitable for outdoor use	Yes
Driver diameter	57 mm
Woofer diameter	133 mm
Number of drivers	2
Speaker enclosure	Ported
Speaker placement	Ceiling-mountable, Wall-mountable
Audio output channels	1.0 channels
Woofer diameter (imperial)	5.25 \
Impedance	8 Ω
Sensitivity	85 dB
Frequency range	75 - 18000 Hz
RMS rated power	- W
Package weight	7700 g
Transformer taps	12.5, 25, 50, 100 W

Weight and Dimensions

Depth	216 mm
Width	381 mm
Height	178 mm
Weight	6400 g
Depth (with stand)	280 mm