15
S
ETUP
English Deutsch FrançaisDansk Español Italiano SvenskaNederlandsDansk Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
Placing the product in the right location for your performance
Before you start to assemble this product, it is a good idea to find the best location for it.
WARNING: The completed unit weighs about 60 lb (27 kg). Moving the completely assembled
unit is not recommended.
Placing the L1 model I power stand in the right location is an important step in the process
of setting up this product to create your own individualized sound. Determining the best
location for your performance depends on several things: size of staging area, number of
performers, and if you will be sharing the L1 model I power stand connections.
The following guidelines should get you started in setting up for a concert or show.
Note: For more information on setting up your L1™ model I system product to achieve an
individualized sound, visit www.Bose.com/musicians on the Internet.
• Place the product at the rearmost part of the performance area or stage.
• If possible, position the product behind the performer.
• If you are part of a group, avoid crowding together on stage. Allow some distance,
ideally 7-8 feet (2.1-2.4 m) between you and the L1 model I Cylindrical Radiator
®
loud-
speaker and another performer. This allows the sound to wrap around performers and
reflect off adjacent surfaces of the room, creating a more pleasing room-filling sound.
Figure 4
Placement
recommendations
Drummer
Keyboard
Bass
Drummer
Keyboard
Bass
Drummer
Keyboard
Bass
Good
Better
Best
Wall
Wall
Wall
3 ft
(0.9 m)
3 ft (0.9 m)
5 ft (1.5 m)
7-8 ft
(2.1-2.4 m)
3 ft
(0.9 m)
3 ft
(0.9 m)
3 ft
(0.9 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
3 ft (0.9 m)
5 ft (1.5 m)
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
PIASOG.book Page 15 Wednesday, February 14, 2007 3:10 PM
To Next Page
Loading...
Need help?
General