System Setup
First
time
startup
What you need:
Remote
control
and batteries
Before you start:
ADAPTiQ® audio
calibration
headset
USB cable
SoundTouchTM
wireless
adapter
•
Do not connect any devices to the
control console until instructed by
UNIFY®.
• Make sure the sound bar and Acoustimass®
module are
in
their final positions.
Set up
the
remote
control
A.
Slide
the battery
compartment cover off the back
of
the remote
control.
AA (IEC
LR6) batteries
(4)
B.
Install
the four AA
(IEC
LR6) batteries, matching the
polarity
markings
(+
and
-)
to the markings inside the battery compartment.
C.
Slide
the battery cover back into place.
18-
English
To Next Page
Loading...
