Bose Lifestyle 135 Series III - Page 19

System Setup
Power on your system
A.
Press the power button on the control console.
Because the system is
in
a
low
power state when
in
standby, it takes several
seconds
to
start. When the status indicator on the control console changes
from blinking
to
steady green, your system is ready to use.
Status indicator
Power
button
_
______;
B.
Check that the status indicator on the sound bar is off.
Status indicator
If
the
status indicator
is
blinking orange:
•
There is no wireless connection between the speaker and the Acoustimass®
module. Refer
to
"Troubleshooting"
in
the operating guide.
C.
Power on your
TV.
D.
Using your TV's remote control, change the TV input to the one that is
connected
to
your Lifestyle® 135 series
Ill
home entertainment system.
E.
Follow
the instructions on your TV screen. The system instructs you
to
do
the
following:
•
Select your language.
•
Run the ADAPTiQ® audio calibration system.
•
Connect and set up audio/video devices using the
UNIFY®
intelligent
integration system.
•
Configure your
Bose®
remote
to
control your connected devices.
•
Complete network setup with the
SoundTouch™wireless adapter.
English-
19