23
Reference
English
Setting up a second listening zone
Your LIFESTYLE
®
home entertainment system can direct sound from one or two sound
sources (such as CD, AM/FM tuner, TAPE, or AUX) to two different listening zones at the
same time.
What is a zone?
Each listening area, whether a room or a group of rooms (including outdoor areas), is called a
zone. Your primary listening area is set up as zone 1.
What do I need for setting up a second zone?
• A Bose
®
powered speaker system that is compatible with your home entertainment system.
An existing stereo system can also be connected (special adapter required).
• The appropriate LIFESTYLE
®
system cable to connect the zone 2 speaker system to the
SPEAKER ZONES 2 connector on the rear panel of the media center.
•A second LIFESTYLE
®
system remote control to operate the zone 2 sound.
See your dealer or contact Bose for information on obtaining additional powered speakers,
remote controls, cables, and adapters for connecting additional equipment.
How do I set up a speaker system in a second zone?
1. Choose a location for the speaker system in zone 2.
2. Connect the audio input cable from the zone 2 system to the SPEAKER ZONES 2 output
on the rear panel of the media center.
3. When power is connected and you are ready to set up your second remote control, see
“Setting up a second listening zone” in your LIFESTYLE
®
system operating guide.
Figure 21
Media center-to-zone 2
connections
Note: For zone 2, use only cables that have a mini-DIN connector marked “FIX”. Cables
marked “VAR” should not be used, unless specified in the owner’s guide for the product.
TV
SENSOR
IR
EMITTER
SERIAL
DATA
SPEAKER
ZONES
1
2
1.1A
33V DC POWER
AM
FM 75
ANTENNA
OPTICAL OPTICAL
INPUT
OUTPUT
AUDIO OUTPUTS
DIGITAL DIGITAL
R
L
RECORD
DIGITAL
R
L
DIGITAL
R
L
DIGITAL
R
L
DIGITAL
R
L
TAPE
AUDIO INPUTS
AUX VCR TV
VIDEO INPUTS
COMPOSITE S-VIDEO
COMPOSITE S-VIDEO
VIDEO OUTPUTS
Right channel
Zone 2 output connection
Zone 2 stereo adapter kit cable
(Mini-DIN connector is marked “FIX”)
Left
channel
Control
Note: Before using
your zone 2 speak-
ers, you may need to
change the “Zone 2
Protocol” setting for
the zone 2 speakers
you are using. See
“Changing the System
Setup” in your operat-
ing guide.
Zone 2 speaker connections
To Next Page
Loading...
