Installing the TV
on/off
detector
(optional)
The
TV
on/off detector senses whether your
TV
is
on
or off. This enables the media center
to
automatically switch the
TV
on, as needed, when another video source
(DVD,
cable/satellite
box, etc.)
is
selected. If you choose not
to
use the sensor, you will need
to
turn the TV on sep-
arately each time it
is
needed.
) Note:
This
device will not work with LCD
and
plasma
TVs,
so you
may
want
to
skip these
steps.
1. Plug the connector on the end
of
the cord into the
TV
SENSOR jack on the back of the
media center.
2.
Position the
TV
on/off detector on the back
of
your
TV
as shown
in
Figure 15.
) Note:
00
NOT use.the mounting strip yet
to
affix the detector.
Wait
until your system is oper-
ating
and
you can determine that the sensor is working properly from this location. Refer
to
UTesting
the
TV
on/off detector"
in
your LIFESTYLI? Operating Guide.
Mounting the detector
using the mounting strip
Back
of
TV
TV
SENSOR
jack
) Note:
If
you have a projection
TV,
the bottom rear
of
the enclosure
is
the best location for
mounting the detector.
. Figure
15
TV
ani
off
detector installed
on
your
TV
Turning
off
the internal speakers in
your
TV
When you listen
to
TV
sound through your
LIFESTYLE®
system, the speakers
in
your
TV
should not be on. Use the on-screen menus
in
your
TV
to
select "Internal Speakers: Off" (your
on-screen message may be different).
You
can also lower the volume of your
TV
to
its lowest
setting. Refer
to
your
TV
owner's guide for detailed instructions.
17
To Next Page
Loading...
