Controls and Indicators
8 - English
Information display
The display provides operating and system status information.
Examples:
Source identification
Cable
Volume
Cable
43
Radio tuner
FM
90.9 - WBUR90.9
P1
iPod
iPod
Album
Operating prompt
Hold number key
to set preset
SoundTouch
™
Remote glow button
Pressing the glow button on the rear of the remote illuminates the remote
buttons and the display. The light turns off automatically after several seconds to
prolong battery life.
To adjust the illumination level of the display:
Note: If the currently selected source is AM or FM,
switch to any other source before making this
adjustment. This prevents unintentionally deleting
a radio preset.
1. Press and hold the
and OK buttons at the same
time for 5 seconds.
2. Press the up
or down navigation button to
select Brightness or Contrast.
3. Press the left
or right navigation button to
decrease or increase the illumination level.
4. Press either the OK or
to return to normal
operation.
SoundTouch
Presets
To Next Page
Loading...
