6
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
POWER ON/OFF CONTROLS
Starting your system
Press the power button on the remote or on the
console.
In several seconds, the power LED on the console
changes from blinking to solid green. The system is
now ready for use.
Pressing the remote SOURCE button also
starts your system and displays the SOURCE
menu on your TV screen.
Pressing the Setup button on the console
also starts your system and displays the
Setup menu on your TV screen.
Turning on your TV
If you programmed your remote in the Unify™
setup menu, press the TV power button on the
remote control to turn on your TV. Otherwise, use
the remote that came with your TV.
Shutting down your system
Press the power button on the remote or on
the control console. The system will shut down
automatically after a few seconds.
However, if you decide to access the power
controls for connected devices, automatic
shutdown will be stopped and you must complete
the shutdown using the onscreen controls.
00.Amaryllis_OperatingGuide.book Page 6 Wednesday, July 14, 2010 2:09 PM
To Next Page
Loading...
Need help?
General
