35
COMPLETE SYSTEM CONNECTIONS
TAB 5TAB 4TAB 6TAB 8TAB 7English TAB 3TAB 2
The IR emitter relays remote control commands to the
devices that are connected to the media center. And the
TV sensor adds an automatic on/off feature for your TV.
1. Locate the connector labeled IR Emitter on the
back of the media center.
2. Insert the IR emitter plug into this connector and
center the other end in front of your TV.
What you need to use:
IR emitter
Your TV
TV sensor
Media center
Attaching
the IR emitter
and TV sensor
8
00.LIV_IG.book Page 35 Monday, January 12, 2009 10:58 AM
To Next Page
Loading...
