38
COMPLETE SYSTEM CONNECTIONS
EnglishTAB 6TAB 8 TAB 7 TAB 3TAB 5 TAB 2TAB 4
3. Straighten the antenna cable and spread the two
ends far apart.
You may need to raise the ends and adjust the
position to get clear reception.
For AM:
1. Select the AM antenna and stand.
2. Locate the AM antenna connector on the media
center and insert the AM antenna plug into this
connector.
3. Fit the small tabs on the antenna ring into notches
on the stand and press firmly to attach them.
4. Continue with on the next page for completing
power connections.
00.LIV_IG.book Page 38 Monday, January 12, 2009 10:58 AM
To Next Page
Loading...
