65
REFERENCE
Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
3. Locate the S-Video and composite Video Out
connectors on the VS-2 connection pannel.
4. Insert the video cable plugs on the SCART adapter
into the matching Video Out connectors on the
VS-2.
5. On the same end of the SCART adapter, identify
the plug for the TV sensor.
6. On the back of the media center, locate the TV
sensor connector.
(cont.) For TVs requiring SCART (in Europe, only)
10.LIV_Reference.fm Page 65 Thursday, January 15, 2009 3:56 PM