English - 19
Powering on the system
1. Press the power button on the control console.
Note: The system operates in a power saving mode when it is off to keep
energy consumption low, so it may take several seconds to start.
2. Check that the status indicator on the soundbar is off.
Note: If the status indicator is blinking amber, there is no wireless connection
between the speaker and the Acoustimass
®
module. Refer to “Trouble-
shooting” in the operating guide.
Status indicator
3. Power on your TV.
4. Using your TV’s remote control, change the TV input to the one that is
connected to your Lifestyle
®
SoundTouch
™
system.
Starting Up the System
Power button
Status indicator
To Next Page
Loading...
