12 - English
2. Lay the module on its side and locate the connector panel.
Connector
panel
3. Insert the audio input cable connected to the control console into the Media
Center connector on the Acoustimass module, with the flat surface and arrow
facing the front of the module.
Media
Center
4. Remove a power cord from the power cord box.
5. Insert one end of the power cord into the AC Power connector on the
Acoustimass module.
AC Power
6. Plug the other end of the power cord into a live AC (mains) power outlet.
Setting Up the Acoustimass
®
Module
To Next Page
Loading...
