Figure
14
Room Code B
setting, for one
expansion room
BEYOND THE BASICS
The importance
of
room codes
Your PERSONAL®music center
II
is
set at the factory for use
in
an
expansion room, while the
LIFESTYLE®
system media center and
primary remote are set for use in the main room. The use
of
unique
room codes lets your
LIFESTYLE®
system know where commands
that come to it originate, so it can respond
in
the appropriate
room.
With just one expansion room set up, the
PERSONAL®
music
center should remain set
to
Room Code
B,
as shown
(Figure 14).
However,
to
use more than one
PERSONAL®
music center
II,
or with other
LIFESTYLE®
system remotes for use
in
other rooms,
leaving them all set for Room B will
not
work.
When
to
change
the
room code
• If you have set up other expansion rooms already. There are14
room codes in addition
to
Room
A.
• If you prefer
to
use your PERSONAL®music center
II
in the main
room,
in
addition
to
the primary remote control, it must be set
for
Room
A.
• For use with
an
SA-2 or SA-3 amplifier the
PERSONAL®
music
center
II
must have
an
identical room code.
Like the
PERSONAL®
music center
II,
these
Bose®
link compati-
ble amplifiers are set at the factory
for
Room
B.
If you change
this setting, because you have more than one expansion room
set up, your PERSONAL®music center
II
room code must
change
to
match it.
To
learn how
to
choose a different room code, see "To change set-
tings for a feature" on page 21.
)
Note:
For more room code details, refer to the operating guide that
came with your
LIFESTYL~
system.
23
To Next Page
Loading...
Need help?
General
