PREPARING FOR
USE
Confirm
that
current
settings
are
right
Your PERSONAL®music center
II
is pre-set at the factory
for
compatibility, as follows:
•
To
control sound
in
a single expansion room - Room B - or area
(not
in
Room A, the location
of
your
LIFESTYLE®
media center).
• A house
code
identical
to
the one given every new LIFESTYLE®
system.
For details, see "Why would you change the house
code?"
on
page 24.
•
To
receive Audio stream
2,
which is different from the stream
that delivers sound
in
the main room where the
LIFESTYLE®
media center is located.
For details, see "Audio streams multiply your options" on
page 24.
• English as the language used
for
display text.
With a
LIFESTYLE®
system previously set up and used with
another language, your PERSONAL®music center
II
detects the
difference (only the first time you turn it on), and pauses opera-
tion
to
switch
to
that
language.
) Note:
To
learn
how
to select a different text display language for
your
system, refer to
uMedia
center options" in the Operating Guide
that came with the system.
If the above settings are right, you can begin
to
use your remote
now.
Change
the
settings, as
needed
• Language:
to
change display text
to
your preferred language,
press the
Setup
button.
For further information on
how
to
make the change, see "Adjust-
able features
of
the PERSONAL® music center II" on page 21.
• Room codes:
to
choose a different
code
that will either be
unique
to
your PERSONAL®music center
II
or the same as the
main room, see "The importance
of
room codes" on page 23.
• House codes:
to
learn
how
to
match your PERSONAL® music
center
II
house code
to
one that has been changed in your
LIFESTYLE®
primary remote, see
"Why
would you change the
house code?" on page 24.
• Audio stream:
for
instructions on changing streams and
an
explanation
of
your
choices, see "Audio streams multiply your
options" on page 24.
5
To Next Page
Loading...
Need help?
General
