English
9
Anti-Skip Button
The Anti-Skip button reduces skipping if the CD
player is moved during playback. This feature is ON by
default.
displays when the feature is ON.
Press the Anti-Skip control to disable or re-activate this
feature during Play, Pause, or Stop modes.
Note:
Activating Anti-Skip may degrade playback quality.
Hold
You can lock the CD player to prevent
the settings from changing during
playback or when the player is OFF.
Move the Hold switch, located on the
back of the player, to ON to enable
Hold and lock all controls.
is displayed to indicate Hold is activated.
You will not be able to operate the controls of the CD
player until the Hold switch is set to OFF.
When the player is OFF, will flash momentarily when
you press Play/Pause when Hold is ON.
The Hold symbol is not displayed when Hold is OFF.
Use
QCIIcdplayer.1.fm Page 9 Tuesday, October 7, 2003 2:10 PM
To Next Page
Loading...
Need help?
General
