39
|
ENG
BATTERY
CHARGE THE HEADSET
1. Connect the small end of the USB cable to the micro-USB port on the
right earcup.
2. Connect the other end to a USB wall charger.
The battery light blinks amber. When the battery is fully charged, the battery light
glows green (see page 41).
NOTE: The headset doesn’t play while charging.
Charging time
Allow up to 2 hours to fully charge the headset.
NOTES:
• When connected wirelessly, a full charge powers the headset for up to 20 hours.
• When connected using the audio cable or gaming microphone, a full charge powers
the headset for up to 40 hours.
Hear the battery level
Each time you power on the headset, a voice prompt announces the battery level.
When the headset is in use, you hear “Battery low, please charge now.”
NOTE: To visually check the battery, see the light located on the right earcup. For
more information, see “Battery light” on page 41.
To Next Page
Loading...
