IMPORTANT SAFETY INSTRUCTIONS
2
|
ENG
Please read and keep all safety, security, and use instructions.
Bose Corporation hereby declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.
The complete declaration of conformity can be found at: www.Bose.com/compliance
Important Safety Instructions
1. To avoid accidental ingestion, keep Sleepbuds™ away from children and pets. Sleepbuds™ contain a nickel-metal
hydride (NiHM) battery, and may be hazardous if swallowed. If ingested, seek immediate medical attention.
When not in use, store Sleepbuds™ in the charging case with the charging lid closed, and keep out of the reach
of children and pets.
2. Do NOT allow children to use Sleepbuds™.
3. Clean Sleepbuds™ and charging case only with a dry cloth. For additional cleaning instructions, see page 27.
4. Only use attachments/accessories specified by the manufacturer.
WARNINGS/CAUTIONS
• When using this product, basic precautions should always be followed, including the following:
– Read all the instructions before using the charging case.
– To reduce the risk of injury, close supervision is necessary when the charging case is used near children.
– Do not expose charging case to water, rain, liquids or snow.
– Do not use the charging case in excess of its output rating. Overload outputs above rating may result in a risk of
fire or injury to persons.
– Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
– Do not disassemble the charging case. Take it to a qualified service person when service or repair is required.
Incorrect re-assembly may result in risk of fire or injury to persons.
– Do not open, crush or expose a charging case to fire or excessive temperature. Exposure to fire or temperature
above 212° F, 100° C may cause explosion.
– Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the product is maintained.
• Sleepbuds™ are designed to mask sounds. Do NOT use Sleepbuds™ in a way that may interfere with sounds you
need to hear for your safety or the safety of others.
• Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL,
CSA, VDE, CCC).
• Remove Sleepbuds™ immediately if you experience a warming sensation or loss of audio.
• Do NOT submerge Sleepbuds™ in water. Do NOT expose Sleepbuds™ to moving water (e.g., from a faucet, etc.).
Do NOT wear Sleepbuds™ while showering or bathing, or when participating in water sports, e.g., swimming,
waterskiing, surfing, etc.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
