Bose Solo 15 II Series - Tap Command Setup

34
TAP COMMAND SETUP
Required Items
1. TeraTerm terminal emulator - download at http://
sourceforge.jp/projects/ttssh2/
2. TAP Cable part number 264565
3. RS232-TTL Converter - B&B electronics Model
232LPTTL or similar - http://bb-elec.com
Setup
1. Connect the TAP cable, using a RS232-TTL
converter, to your computer’s COM port and the
unit’s DATA connector on the rear.
2.1 Select COM Port
2.2 Select Serial Port
2.3 Set Serial Port
Baud: 115200, Data bits: 8, Parity: No, Stop bit: 1
2.4 Select Terminal
2.5 Set Terminal to “Local echo” - Click “ OK”
2.6 Set Terminal to “Local echo” - Click “ OK”