Bose Solo TV Sound - Connecting Audio Cables; Connecting Power

10 – English
SYSTEM SETUP
4. Plug the other end of the chosen audio cable into the corresponding audio input
connector on the sound system. If you wish, you can slide the cable into the built-in
cable clip.
5. Plug one end of the included power cord into the AC input connector.
Coaxial
Digital
Optical
Digital
R — L
Analog
Cable clip
Optical cable
(for example only)
Note: Make only one
audio connection.
Service and Data connectors
are for service use only
AC input ( )
Cinnamon_OG.book Page 10 Tuesday, January 17, 2012 9:57 AM