Bose SoundDock 10 Bluetooth User Manual

5
SOUNDDOCK
®
10 BLUETOOTH
®
DIGITAL MUSIC SYSTEM
TAB 5, 13TAB 4, 12 TAB 6, 14 TAB 8, 16TAB 7, 15English TAB 3, 11TAB 2, 10
Listening to other devices
You can connect the audio output of a PC, CD player, TV,
MP3 player, or other type of audio device to the AUX IN
connector. The AUX IN connector accepts a 3.5mm
stereo cable plug.
1. Using the appropriate stereo cable, connect your
audio device to the AUX IN connector.
Note: A device must be plugged into the AUX IN connector in
order to select the AUX source.
2. Press AUX on the Bose
®
remote. The AUX IN
indicator glows on the front panel.
3. Turn on the audio device and start playing music.
4. Set the volume of the device to near maximum.
Note: The SoundDock 10 Bluetooth system is designed to
provide the best audio performance without any additional
audio effects. Make sure all audio effects are turned off in the
connected device.
3.5mm stereo cable
(not supplied)
Laptop PC
AUX IN
indicator
Big_Max_OG.book Page 5 Wednesday, May 2, 2012 10:02 AM

Bose SoundDock 10 Bluetooth Specifications

General

Remote Control	Yes
Audio Output	Stereo
Connectivity	Bluetooth
Power	AC power
Compatibility	iPod, iPhone
Bluetooth Range	Up to 30 feet (9 meters)