Bose T1 ToneMatch - Mounting Options

7
SYSTEM SETUP
SvenskaItalianoFrançaisEspañolDeutschDanskEnglish Nederlands
Mounting options
The T1 includes hardware for mounting it on a Cylindrical Radiator
®
loudspeaker.
The optional microphone stand mounting bracket allows you to mount the T1 on the shaft of most microphone
stands. See “Mounting the T1 on a microphone stand (optional)” on page 9.
Mounting the T1 on a Cylindrical Radiator
®
loudspeaker
Use the carriage and mounting bar included in the carton to mount the T1 on the Cylindrical Radiator
®
loudspeaker.
The mounting bar is stored inside the T1 cover (Figure 6). Open the latch and lift the mounting bar from the case.
Figure 6
Removing
mounting bar
from cover
Latch
Mounting bar
Mounting bar