36
|
EN
OPERATION
Adjusting the Zoom Ratio
To adjust the zoom ratio of the camera, press one of the Zoom buttons (+ or −) on the
remote control.
Press a button once to adjust the camera in increments, or press and hold it for
continuous adjustment.
Saving and Recalling a Preset
You can save the camera’s pan, tilt, and zoom settings to a preset: Preset 1 or Preset 2.
When you recall a saved preset, the camera will immediately return to the saved pan,
tilt, and zoom settings.
To save a preset:
1. Adjust the pan, tilt, and zoom settings as desired.
2. Press and hold the desired preset button on the remote control (Preset 1 or Preset
2) for 3 seconds. The camera settings will be saved to that preset.
To recall a saved preset, press the desired preset button on the remote control (Preset
1 or Preset 2). The camera will immediately change the pan, tilt, and zoom settings to
those saved to that preset.
To Next Page
Loading...
