Headset Installation
Remove all 4 screws (2 on each side) on pivot-
ing arms that sides of ear cups are attached to.
(gure 1)
Place headset over approximate area where
it would go over the helmet (be aware of left/
right of headset, as well as helmet). (gure 2)
Secure headband straps over headband of
headset. (gure 3)
1900 Weld Blvd. Ste. 140 El Cajon, CA 92020 • 800.440.5904 • gibson-barnes.com
Bose
®
X Headset
Installation of headset into cloth/leather helmet
Tools Required
Small Phillips Head Screwdriver
gure 1
gure 2
To Next Page
