Why can't I hear sound being input via USB on my Boss Audio Systems BR-800?
If you can't hear sound being input via USB on your Boss Audio Systems Recording Equipment, check if INPUT MIX is set to “OFF”.
Why can't I play back a WAV file on my Boss Audio Systems Recording Equipment?
If you can't play back a WAV file on your Boss Audio Systems Recording Equipment, you might be attempting to play back a WAV file in an unsupported format.
General| Type | Digital Recorder |
|---|---|
| Channels | 8 |
| Recording Format | WAV |
| Sample Rate | 44.1 kHz |
| Phantom Power | Yes |
| Storage | SD card (up to 32GB) |
| USB | USB 2.0 |
| Effects | Reverb |
| Compatibility | Windows, Mac |
| Inputs | 4 x XLR/TRS combo jacks |
| Outputs | 1/4" headphone output |
Steps to connect and prepare the BR-800 for recording.
Basic steps for recording and playing back audio on the BR-800.
Operations for editing recorded tracks and finalizing songs.
Key safety guidelines for operating the unit to prevent damage or injury.
Further safety guidelines covering handling, environment, and usage.
Detailed breakdown of the BR-800's top panel controls and indicators.
Explanation of input sensitivity knobs and REC LEVEL knob.
Explanation of song name, time, frame, measure, and indicators.
Description of PHONES and GUITAR/BASS jacks.
Explanation of LINE OUT, FOOT SW/EXP PEDAL, LINE IN, and INPUT jacks.
SD card slot, USB connector, POWER switch, and DC IN jack.
Step-by-step guide for installing AA batteries.
Correct procedure for turning the BR-800 and connected equipment on/off.
Selecting input source and musical category for EZ Recording.
Setting input levels using REC LEVEL knob and faders.
Steps to start and stop the recording process in EZ mode.
Diagrams showing necessary external connections for the BR-800.
Safe procedures for powering the unit on and off.
Steps to create a new song or select an existing one for recording.
Choosing input sources and adjusting sensitivity for recording.
Setting recording levels and selecting tracks for recording.
How to record new parts onto separate tracks while listening to existing ones.
Using manual punch-in/out to re-record specific sections.
Executing recording with pre-defined punch-in/out points.
Adjusting the three-band equalizer for individual tracks.
Sequencing patterns using steps to build a song arrangement.
Copying audio data from one track to another.
Saving current song state and managing SD card memory.
Explains the purpose of mastering for optimal song volume and balance.
Steps to mix down tracks and apply mastering effects.
Recording computer audio to BR-800 and hearing computer audio via BR-800.
Connecting and enabling control surface mode for DAW software.
Steps to back up BR-800 data to a computer and recover it.
Assigning functions to foot switches and using expression pedals.
Using the built-in tuner for guitars and basses.
Resetting the BR-800 to its original factory state.
Steps to format an SD card for use with the BR-800.
Providing +48V phantom power to condenser microphones.
Solutions for power, sound, SD card, and button problems.
Explanation of common error messages and required actions.
To Next Page
