To Next PageTo Next Page
Need help?Do you have a question about the Boss Audio Systems CHAOS CH800 and is the answer not in the manual?
General| Max Power Output | 800 Watts |
|---|---|
| RMS Power Output | 4 x 50 Watts @ 4 Ohms, 4 x 100 Watts @ 2 Ohms, 2 x 200 Watts Bridged @ 4 Ohms |
| Channels | 4 |
| RMS Power @ 4 Ohms | 100 Watts x 4 |
| RMS Power @ 2 Ohms | 200 Watts x 4 |
| Peak Power | 800 Watts |
| Minimum Speaker Impedance | 2 Ohms |
| Bass Boost Frequency | 45Hz |
| Bridged RMS Power @ 4 Ohms | 400 Watts |
| THD at Rated RMS Power | THD |
| Input Sensitivity | 200 mV to 6 V |
| Crossover Type | Variable |
| Low Pass Crossover Frequency | 50 Hz to 250 Hz |
| Bass Boost | 0-12dB |
| THD | THD |
| Fuse Rating | 30A |
Maximum power, RMS power, and bridged power output ratings.
Frequency response, harmonic distortion, S/N ratio, power voltage, and consumption.
External dimensions of the amplifier unit.
Emphasizes using only specified parts for safety and liability.
Instructs to return parts and wiring to original positions after repair.
Advises checking all components are securely fastened post-repair.
Warns about disconnecting battery before automotive connection work.
Advises against reusing chips and handling tantalum capacitors carefully.
Provides guidelines for soldering flexible PCBs to prevent damage.
Instructs to turn off unit before disassembly and recheck work.
