Contents
High-Performance, Weatherproof Speakers ———— 2 PCS
Speaker Clamp Mounting Hardware———————- 1 PAIR
Rubber Mounting Shims———————————— 4 PCS
Power Plug with Fuse ————————————— 1 PC
User’s manual ————————————————- 1 PC
Features
On/Off Switch
Aux-In (3.5 mm)
Speaker Clamp Mounts
Weatherproof Volume Control
High-Impact, High Temperature Speaker Enclosures
Weatherproof Speakers
Bluetooth® Audio Streaming
Installation
1. Screw the clamps to the bottom of the speakers.
2. Find a safe, ideal mounting location and fit the clamps over the chosen mounting bars.
3. Fasten the mounting screws after you review the safety of the mounting location.
Wiring
1. Remove the seat.
2. Route the fused power leads to the battery. (keep away from moving parts and/or hot exhaust)
3. Connect the RED ring terminal to the+ 12V post of the battery.
4. Connect the BLACK ring terminal to ground post of the battery.
5. Connect to the connector the white mating connector leading the speaker.
Power Switch
1. The switch is used to Power On/off the system.
2. It can be mounted near the volume control for easy access.
3. Reinstall the seat.
Connections
To Next Page
Loading...
