BOSS 120-220 Quickstart Guide Windows Page of 60011R052 6
120-220 Quickstart Guide for Windows
Surge Protection Indicator
Smart Plug is ON and will power load.
Smart Plug is OFF and will not power load.
Press power button to manually turn Smart Plug ON-OFF.
Use QR Code to add and provision Smart Plug
from a mobile device using iOS or Android.
Important electrical information listing voltage and
max amperage information.
Fastens 220 Smart Plug in 220V
socket to act as a theft deterrent.
To set Smart Plug to Factory Default Mode:
•
Hold power button down firmly (≈ 10s) until blue light flashes
and release button.
•
Device will restart to factory settings (Factory Default mode).
•
Device in Factory Default mode will have to be re-connected
to your WiFi network but will not need to be re-added to your
BOSS account.
(ON) Surge Protection is Working.
(OFF) Device has absorbed a surge and protection is off.
To Next Page
Loading...