Need help?Do you have a question about the Boss 120 and is the answer not in the manual?
General| Brand | Boss |
|---|---|
| Model | 120 |
| Category | Network Router |
| Language | English |
Indicates the status of surge protection: working or absorbed.
Controls power to the load and allows manual ON/OFF operation.
How to reset the Smart Plug to its default settings.
Use QR code for adding and provisioning the Smart Plug via mobile.
Provides important electrical specifications like voltage and amperage.
Shows whether surge protection is active or has been compromised.
Manages power to the connected device and enables factory reset.
Scan QR code to add and provision your Smart Plug easily.
A screw to secure the plug in a 220V socket as a theft deterrent.
Details on voltage and maximum amperage for the Smart Plug.
Lists necessary software, hardware, and OS for installation.
Steps to sign up or log in to your BOSS account for setup.
Overview of adding the plug to your account and connecting to Wi-Fi.
Find and record the unique serial number on the Smart Plug.
Log in to your account and initiate adding a new device.
Enter device name, select type, serial number, and location.
The Smart Plug must be connected to your network after account setup.
Connect your computer to the Smart Plug's temporary WiFi network.
Choose 'Public Network' when prompted to allow connection.
Open web browser and navigate to the plug's IP address for setup.
Enter username 'user' and password using the plug's serial number.
Choose your home WiFi network from the list provided.
Input your WiFi network's SSID and password.
Save and apply the WiFi configuration to the Smart Plug.
Confirmation that the Smart Plug is now installed and ready.
To Next Page