Need help?Do you have a question about the Boss AR1200.2 and is the answer not in the manual?
Wiring diagrams and setup instructions for 4-channel amplifiers and Tri-mode operation.
Wiring configurations for 4-channel amplifiers in 4-channel and bridged modes.
General| Channels | 2 |
|---|---|
| Power Output (RMS) | 1200W |
| Total Power | 1200W |
| Input Sensitivity | 200 mV - 6 V |
| Signal-to-Noise Ratio | > 90 dB |
| Impedance | 2-8 Ohms |
| Dimensions | 14.5 x 10.5 x 2.5 inches |
| RMS Power @ 2 Ohms | 600W x 2 |
| Bridged Power @ 4 Ohms | 1200 Watts |
To Next Page