Boss BF-2 Flanger - Battery Replacement and Precautions; Cautions; AC Adaptor BOSS ACA Series (Option)

BATTERY REPLACEMENT AND PRECAUTIONS
BATTERY REPLACEMENT USE 9V BATTERY
e Loosen the screw and open the Pedal.
e Take out the battery from the Battery Housing and pull up the Battery Strap.
e Replace with a new battery.
e Put the Coil Spring to the Spring Base and close the Pedal.
e Firmly tighten the screw.,
* Make sure that the Battery Strap is not caught in the Pedal or Coil Spring.
PEDAL (COVER) Bescheinigung des Herstellers /Importeurs
THUMB SCREW Hiermit wird bescheinigt, dali der/die/das
PO ere Roland FRANGER ane eres EN
¡Gerat, Typ. Bezeichnung)
SPRING BASE
in Ubereinstimmung mit den Bestimmungen der
Á COIL SPRING Amtsbl. Vfg 1046 / 1984
9V
BATTERY
{Amtsblattverfugung)
funk-entstört ist.
Der Deutschen Bundespost wurde das Inverkehrbringen dieses Gerátes
angezeigt und die Berechtigung zur Uberprufung der Serie auf Einhaltung
der Bestimmungen eingeráumt.
BATTERY
BATTERY HOUSING Roland Corporation Osaka / Japan
CONNECTOR
eae
TN
we
OA
CAUTIONS
e
When
you
plan
not
to
use
the
BF-2
for
eBe
sure
to
keep
the
battery
in
the
a
long
period,
remove
the
battery
to
housing
even
when
using
the
AC
prevent
current
leakage
and
leaking
adaptor.
of
battery
acid.
*
Even
if
AC
Adaptor
cord
comes
out
during performance, operation imme-
diately changes to battery, causing no
trouble in continued performance.
e İf battery voltage drops, effect becomes
inferior or no sound is produced. To
prevent this, replace the battery a little
earlier.
e
Power
is
switched
on
when
the
input
jack is being used. When the unit is
not being used, disconnect the input
in order to conserve battery life.
Use BOSS AC adaptor
for AC operation.
Use of different
adaptors may cause
improper operation
or no sound.
BOSS ACA-240
FOR 240V AC
BOSS ACA-120
FOR 117V AC
BOSS ACA-220
FOR 220V AC