17
Simple Troubleshooting Guide
PROBLEM
No Power
Unit stops responding or shows
error in display
Unable to receive radio stations
Poor effect on receiving a station
CAUSE/SOLUTION
Check whether the fuse is blown, replace
with fuse of proper value if necessary.
Press the RESET Button .
Check whether the antenna is insert-
ed or the antenna is properly con-
nected; if not, insert the antenna or
connect it properly.
-Antenna may not be of the proper length.
Make sure the antenna is fully extended.
If broken, replace the antenna with a new
one.
-The broadcasting signal is weak.
-The antenna is poorly grounded; check
and make sure the antenna is properly
grounded at its mounting location.
To Next Page
Loading...
