4.
In
the connection status: the audio
of
mobile phone transfers to the car audio system
whenever calling out or receiving a call.
5.
Dialling when in connection status
5.1
Dial with the mobile phone directly.
5.2 Dial with remote control with the following procedures:
(1) Input telephone number with number buttons 0-9
* Short press CLEAR button to cancel the wrongly input number if necessary
(2) Short press TEL to execute the dialling.
5.3
To
redial the last phone number dialled
Short press REDIAL button or tap
the.
icon, It will dial the last phone number.
6.
Accept/Reject/End Call
6.1
During ringing, short press TEL button to accept the call
6.2 During ringing, short press HANG UP button to reject the call
6.3 During talking, short press HANG UP button to end the call
Note: During ringing, the phone number appears
on
the screen.
7.
Bluetooth Audio Streaming
To
transfer the audio
of
a file played by Mobile Phone to the Car Audio Player
In
the connection status between the Bluetooth devices
of
the Car Audio Player
and a Mobile Phone,
if
the mobile phone can play audio or video files and support
A2DP,
when the Mobile Phone plays
an
audio file(For some Mobile Phones, you
must select Play by BT firstly), the audio
of
the playing file will be transferred
to the Car Audio Player.
In
A2DP mode, if the Bluetooth device
of
the Mobile Phone support
AVRCP,
the
functions
of
the
»1.
1«
,PLAY/PAUSE, EJECT, MUTE,
EQ,
LOUD, VOL and SEL
buttons are the same as one
in
media mode(no fast forward/rewind functions for
the
»1/1«
buttons). The other buttons available
in
media mode are not available.
To Next Page
