Boss KATANA-100 User Manual

KATANA-50
KATANA-100
KATANA-100/212
KATANA-HEAD
KATANA-50
KTN-50
50 W output, 30 cm (12 inch) speaker
KATANA-100
KTN-100
100 W output, 30 cm (12 inch) speaker
KATANA-100/212
KTN100/212
100 W output, 30 cm (12 inch) speaker x 2
KATANA-HEAD
KTN-HEAD
100 W output, 12 cm (5 inch) speaker
This owner’s manual applies to the KATANA-50. KATANA-100,
KATANA-100/212, and KATANA-HEAD.
A
50/100 only
,
100/HEAD only
, or
HEAD only
icon will be used to
mark explanations that pertain only to a specic model.
* All operating methods and panel specications are common
between the KATANA-100 and the KATANA-100/212.
Owner’s Manual
Guitar Amplier
BOSS Guitar Amp “KATANA”
An all-in-one guitar amp that’s ideal for live performance
Main Features
5 Four original amp sounds are provided: a “brown
sound” that’s ideal for rock and inherits an edge
from the BOSS WAZA HEAD, in addition to clean,
crunch, and lead.
5 Simple operation and high-quality BOSS eects
are built-in (three can be used simultaneously). In
addition to simple operation from the amp itself,
you can use the dedicated software to edit the
settings from your PC.
5 The power control function lets you adjust the amp
sound to the desired volume, and standby (MUTE) is
also provided
5 A dedicated acoustic amp that can also be used for
acoustic guitar is built-in as well
5 The combo amp models are equipped
with a cabinet tilt mechanism that
allows easier monitoring while you play
(KATANA-50, KATANA-100, KATANA-100/212)
5 The head amp model is equipped with a small
speaker that allows practicing without requiring a
speaker unit to be connected (KATANA-HEAD)
5 You can connect a GA-FC (except for the KATANA-50)
or FS series footswitch to control functions using
your foot
5 The compact and sturdy cabinets are designed for
easy transport

Boss KATANA-100 Specifications

General

Power Output	100 W
Amplifier Type	Solid State
Speaker	1 x 12-inch
Effects	Reverb, Delay, Modulation
Controls	Gain, Volume, EQ (Bass, Middle, Treble), Master, Effects
Dimensions	530 (W) x 248 (D) x 484 (H) mm / 20-7/8 (W) x 9-13/16 (D) x 19-1/8 (H) inches
Weight	14.8 kg (32 lbs 11 oz)
Inputs	1 x 1/4" Instrument, 1 x 1/8" Aux In
Outputs	1 x 1/4" Line Out, 1 x 1/4" Record Out/Phones
USB	1 x Type B
Footswitch	1 x 1/4" (for GA-FC or optional footswitch)
Amp Types	Acoustic, Clean, Crunch, Lead, Brown
Channels	2 (Clean, Brown)
Effects Controls	Booster/Mod, Delay/FX, Reverb, Tap

Summary

Using the Unit Safely

General Safety Warnings and Precautions

Covers important safety instructions, warnings, and cautions for proper operation.

Symbol Explanations and Usage Rules

Explains safety symbols and provides essential rules to observe during use.

Important Notes and Precautions

Power Supply and Unit Placement

Guidance on electrical connections, outlet usage, and proper placement for heat dissipation.

Maintenance, Repairs, and Data Handling

Instructions for cleaning, servicing, data backup, and handling controls.

General Usage and Handling Advice

Covers operation, noise, environmental factors, and cable management.

Top Panel Controls

Input and Amplifier Section

Describes the INPUT jack and controls for AMP TYPE, GAIN, and VOLUME.

Equalizer and Effects Controls

Details on BASS, MIDDLE, TREBLE knobs and BOOSTER/MOD, DELAY/FX, REVERB buttons/knobs.

Presence, Master, and Tone Setting

Explains the PRESENCE, MASTER knobs, POWER CONTROL switch, and TONE SETTING functions.

Rear Panel Connections

Audio and Power I/O Jacks

Details on AC IN, SPEAKER OUT, PHONES/REC OUT, AUX IN, and LINE OUT jacks.

External Device Interfaces

Information on EFX LOOP SEND/RETURN jacks and the USB port.

External Control Interfaces

Foot Control and Expression Pedal Usage

Using footswitches for channel/effect selection and expression pedals for volume/effects.

GA-FC and MIDI Connectivity

Connecting the GA-FC controller and utilizing MIDI IN for external control.

Operational Procedures

Power On/Off Sequence

Step-by-step guide for safely powering the unit and connected devices.

Factory Settings Reset

Instructions to restore the unit's settings to their default factory state.

Tilting the Speaker Stand

Guide on extending the unit's stand for optimal sound projection.

Using Built-in Effects

Factory-Set Effects Overview

Details on the 15 available effects, their assignments, and how to adjust them.

Dedicated Software for Effects

Using the software to download, edit, and manage effects and settings.

Block Diagrams

KATANA-50 Signal Path

Visual representation of the signal flow for the KATANA-50 amplifier.

KATANA-100/212/HEAD Signal Path

Visual representation of the signal flow for other KATANA models.

Main Specifications

Technical Specifications Comparison

Comparison of power output, input levels, speaker, controls, and connectors across models.

Physical Characteristics and Accessories

Details on power consumption, dimensions, weight, included accessories, and optional items.

Regulatory Compliance Information

FCC Interference Statement

Details on FCC rules for radio frequency interference and compliance measures.

Declaration of Conformity and Warnings

Includes conformity statement, type of equipment, and Proposition 65 warning.

Environmental and Regional Information

EU Waste Disposal Guidelines

Explanation of symbols and requirements for separate collection of products in EU countries.

China RoHS Hazardous Substances

Information on hazardous substances in products for the Chinese market.